Overall Growth Balance of LED Plant Assisted Lamps
The following is a list of wavelengths for different color LEDs:
Royal Blue: 445 nm 440 nm~460 nm Blue: 460~490 nm 470 nm Blue: Cyan 490~505 nm
Green: 520~550 nm 530 nm Green Red: Red 627 nm 620~645 Orange: 617 nm 613~620 nm Amber: Amber LED Plant Light 590 nm 585~597 nm{+*/)
On this table, it is not difficult to find blue (470 Nm) and red (627 Nm) LEDs, only plant light, so LED lights, the ideal choice is to use a combination of two colors. The fleshy bulb has a wide range of wavelengths, which coincides with the spectral range of plant photosynthetic and photomorphogenesis; the spectral wave width is half-width narrow, and pure monochromatic light and composite spectrum can be obtained as needed; the light of a specific wavelength can be concentrated to illuminate the crop evenly; The flowering and fruiting of the crop can be adjusted, and the plant height and the nutrient composition of the plant can be controlled; the system has less heat and takes up less space, and can be used for the multi-layer cultivation stereoscopic combination system, realizing low heat load and miniaturization of the production space. The led lamp is an electroluminescent semiconductor material chip, which is cured with silver or white glue to the bracket, and then connected to the chip and the circuit board with silver wire or gold wire, and sealed with epoxy resin to protect the inner core wire. Function, and finally install the outer casing, so the LED lamp has good seismic performance.
Experts say that in semiconductor light sources used in laboratories, the wavelength of the light source is very narrow and the color of the light source can be controlled. By cloning some of the holly seedlings, experts have found the most suitable vegetative plants for growth based on the development of their different colors of light. Once the nutrients are successfully separated, the use of separate radiation on the plants can improve the plant variety. The reporter saw that among the LED fluorescent lamps customized by different plants of Zidongqing Seedling Company, LED plants have the highest growth, but the leaves are small, the roots are very shallow, and malnutrition. The yellow light not only appears on the leaves of the dead seedlings.
led plant light
led plant lights
Royal Blue: 445 nm 440 nm~460 nm Blue: 460~490 nm 470 nm Blue: Cyan 490~505 nm
Green: 520~550 nm 530 nm Green Red: Red 627 nm 620~645 Orange: 617 nm 613~620 nm Amber: Amber LED Plant Light 590 nm 585~597 nm{+*/)
On this table, it is not difficult to find blue (470 Nm) and red (627 Nm) LEDs, only plant light, so LED lights, the ideal choice is to use a combination of two colors. The fleshy bulb has a wide range of wavelengths, which coincides with the spectral range of plant photosynthetic and photomorphogenesis; the spectral wave width is half-width narrow, and pure monochromatic light and composite spectrum can be obtained as needed; the light of a specific wavelength can be concentrated to illuminate the crop evenly; The flowering and fruiting of the crop can be adjusted, and the plant height and the nutrient composition of the plant can be controlled; the system has less heat and takes up less space, and can be used for the multi-layer cultivation stereoscopic combination system, realizing low heat load and miniaturization of the production space. The led lamp is an electroluminescent semiconductor material chip, which is cured with silver or white glue to the bracket, and then connected to the chip and the circuit board with silver wire or gold wire, and sealed with epoxy resin to protect the inner core wire. Function, and finally install the outer casing, so the LED lamp has good seismic performance.
Experts say that in semiconductor light sources used in laboratories, the wavelength of the light source is very narrow and the color of the light source can be controlled. By cloning some of the holly seedlings, experts have found the most suitable vegetative plants for growth based on the development of their different colors of light. Once the nutrients are successfully separated, the use of separate radiation on the plants can improve the plant variety. The reporter saw that among the LED fluorescent lamps customized by different plants of Zidongqing Seedling Company, LED plants have the highest growth, but the leaves are small, the roots are very shallow, and malnutrition. The yellow light not only appears on the leaves of the dead seedlings.
led plant light
led plant lights
评论
发表评论